The roof of a consumer goods warehouse in the Philippines was suffering from corrosion damage and required to be repaired for an area totaling over 65,000 ft².
The roof had some leaks which were required to be fixed. Grit blasting was not permissible. Application had to take place in relatively high humidity.
The roof was mechanically prepared using wire brushes and abrasive pads. One coat of wet and rust tolerant epoxy Epo-chem™ RL 500PF was then applied to all corroded areas. The entire roof was coated with an elastomeric polyurethane roof coating which was specified by the client to give a high gloss finish.
The project was completed quicker than would have been possible using conventional paints and with no additional delays due to the high humidity.
• Wet and rust tolerant
• No grit blasting requirements
• No humidity or dew point restrictions
• Apply and operate at temperature up to 302°F
• Significantly reduced downtime
• Long-term maintenance-free performance